6.9 free trial

[co0rs1]

Here is the link for the new update 6.9


Fixes EPG/Guide not loading issue

if you already have a custom bin loaded on unit simply load nfusion-69bin ..... Please remember to remove the bin from the zip file then load

also you will not have to enter bin# key or $PS info, if already entered

please do not use the autosetup for channel scanning , if you do not have legacy or dishpro setup with diseqc switch.
Use manual scan using blind scan feature.


For new bins
Open Nfusion Uploader 1.31 or UploaderLite


1.Do Factory Default (Must Do)


2.Load nfusion_factory_U17.bin (USE MAIN ON LOADER DO NOT USE BOOT TO LOAD MAIN FILE)


3.Load nfusion_boot_v130.bin in Boot Mode (DO NOT USE MAIN TO LOAD BOOT)


4.Load customftabin.bin(USE MAIN ON LOADER DO NOT USE BOOT TO LOAD MAIN FILE)


5.Done Go to working channel Guide will populate Quickly

If you are entering New Authorization Key for NEW BINS ONLY


You will be able to reenter key at any time.
Now go to user settings...system features password 1478


System Authorize and select authorize system


Enter Authorization Key here
Menu to Exit to Save

You will have to rescan channels please do not use the autosetup if you do not have legacy or dishpro setup with diseqc switch.
Use manual scan using blind scan feature.

You can use debug also only with 6.9 release
go to menu, user settings , system debug will tell you problems if you run all the debug in the menu.
can send information on the screen (the results of the debug) to me if need more help

no estoy seguro pero creo que nesecitaran instalar la llave