Tutoriales para configurar WIZ110SR...

[chumbeco]

Hey amigos, aquÃ* les dejo 2 tutoriales como configurar el WIZ110SR, sólo que están en Inglés....



WIZ110SR WIZNET Compact RS232 ->TCP/IP ETHERNET

Converter confirmed working.





This is confirmed to work with all sonicviews. No need for a pc to run with the
latest emulation files. Can find them for sale on the net between 25 bux to 50 bux. Google is your friend.

C/P Credit to Spoiler

Okay, The task has been completed with the latest emulation files.
Need a dongle for SV... here is what you do.

Search the web for a "WIZ110SR Serial to Ethernet Module"
They are easy to find.... for now.

1-Using the Wiz program... upload the Svlan 4.12FW file.
2-In the Wiz program, click on the "Serial" tab. Change the baud rate (speed) to 115200 and click on the "settings" to save the change.
3-Load the "nochk" Emulator file for your box to the box.
4-Reconnect the 110 board as usual and reboot the box.
5-You should see the "Network adapter connected" message and you should have "Network settings" in your menu.
6-Confirm the info or load the server info if needed and try to connect.

If all has gone well, you should run like any other dongle for SV.
I would move fast as I suspect the dongle might be hard to find soon.

Good luck,
Sp0iler



Aqui otro tutorial, si no entiendes muy bien el primero...




WIZ110SR loading files svlan 4.12FW and WIZ config


1) Connect the WIZ110SR to a power source.

2) Connect an ethernet cable from the router to the WIZ110SR.

3) Open WIZ1x0_105sr and run install.exe

4) Open it and click on Search. Click on Ping and it will say fail.

5) Set up network configuration as follows from PC. If you are unsure, go to Start - Run - Type in cmd and press ENTER. Type in command prompt -ipconfig/all and press enter

Note down the default gateway - this will be the gateway for the WIZ110SR.
Note down the subnet - usually is 255.255.255.0

6) In WIZ config, plug in the local IP as the same as the gateway, EXCEPT for the last part.

Example, if the default gateway is 192.168.1.1, make sure the IP is 192.168.1.XXX - where XXX is some high, unused, random number between 1 and 254, like 155, for example.

7) Plug in the subnet and default gateway that you had noted down.

8) Let the server IP be 0.0.0.0 and port be 1920. Click on serial and change speed to 115200.

9) Click on setting and save. Click on Ping and it should connect now.

10) Click on Upload and load the Svlan 4.12 file.

11) Load the nochk file for SV360P/SV360E/SV4000/SV8000HD from to the receiver. Plug in the WIZ110SR to the receiver now and set it up.



Y los files que se necesitan para esta configuración los encontrarán aquÃ*...


http://servidordeiptv.is/archivos-ge...ows-files.html