Windows Ihub Emulator

[co0rs1]

Windows Ihub Emulator step by step

1 - Unzip windows Ihub Emulator

2 - Select your sonicview model bin and load use usb or rs232
Four bins are provided
SV4000 use SV4000_svlan_14_NoChk_only_rom
SV360Elite use 04-es22-2028_NoChk_A4to20
SV360Premier use SV360P_p2028_NoChk
SV8000HD use HD20-2028_NoChk_2nd_chksum_2nd_try

3- Open Ihub.CFG with wordpad you will see this

SERIAL: /dev/ttyS3 # Comment COM1 = ttyS0, COM2 = ttyS1 ... COM(x) = ttyS(x-1)
SERVER_IP: 192.168.3.103 # Only IP numbers NO names for now
PORT: 10000
NETWORK_TIMEOUT: 1000 # leave it as is 1000
TR_DELAY: 40000 # leave it as is 400000

now its time to change
for SERIAL if your computer have the serial com1 set SERIAL: /dev/ttyS0
for SERVER_IP if your iks provider have number is the server name just change number if not go to
Convert Host Name to IP Address or Find IP address of a host - e.g. find IP address of host name of
and comvert name to ip

for PORT set your iks provider port

save and exit

4. Connect receiver RS232 to computer be sure have NULL cable
Usb to serial work fine just set speed 115200

5. Run svhub and turn on STB wait until get network adapter connected tv screen message

6. on remote control press Menu > Network Setting you will see on tv

Private server 1
change user name to your iks provider
change Password to your iks provider
change Des Key to your iks provider

move cursor to status and click ok should get connected if not double check all setting
click exit and save

wait some seconds and enjoy it

Credits

dale_para_abajo
jvvh5897
nunoit